01. Buy a can of Rust-Oleum Hard Hat V2115 Silver Aluminum from Home Depot or your local paint store ($4.00).


02. Remove the wind stopper meshes and thuroughly clean them of dust and lint. Remove the rubber paddings from each of the three flanges. You may reuse them if you don't have replacement.


03. Start by paiting the top side of one mesh. Hold the can 12-16 inches from the surface of the mesh; spray in a steady back and forth to avoid runs and sags. Allow to dry and apply a second coat.



04. Turn the mesh over and repeat the process. Once done, allow it to dry and repeat the process for the other mesh.



05. Here are the completed meshes.


06. Apply new rubber paddings to all the flanges. In this case, I got them replaced.
 

07. Re-install the meshes back onto the rollbar.


08. Here is a before and after shot.